Engine Service from JGY
|
Looking for more power than 350HP on your SR, 400HP from your RB, or 400HP from you VQ and want it to be reliable? JGY has been building SR’s and RB’s for years and is well known for the quality and the power they can hold. From Washington to New York to Florida to the Caribbean to Finland, the world knows that if the block and head are stamped with “JGY” it’s going to make power. Nissan makes some great motors; but, JGY strives to out do them when they build it.We have built motors available and ready to ship.
All SR motors including but not limited to SR16VE, SR20DET (gti-r), SR20DET (s15), and SR20DE roller rocker get built by JGY. All RB motors including but not limited to RB20DE, RB25DET, RB26DETT, and RB30 motors get built by JGY. Currently, JGY is ONLY building VQ35DE and HR motors. The 3.7 motor and cores are NOT available yet for work by JGY (8-3-11) which is subject to change later. When the 350z and G35 first appeared, JGY knew it would be just a matter of time before calls would be coming in about building those motors. JGY bought a few donor VQ motors and started to work. Their first build was a 4.3L bored and stroked VG35DE motor...to say the least, they mastered that motor as well.
Over-attention to detail is used in all assemblies and measuring. JGY will completely tear down your motor, bore it, (sleeve it if desired) do a complete head service including cutting valve surfaces,, replace seals/guides, install pistons/sleeves/rods, measure/order/install all bearings, install aftermarket parts/cams/intakes/turbo, and then ship the completed motor to you ready to drop into your vehicle if you are not picking it up. They can even set up the shipping TO JGY from you. Each motor get stripped/washed/ and looks like a new motor upon receipt. All motor builds receive a free IN-house powder coat job on the valve cover/covers.
|
SR Series Pricing:Stage 1: $4000 500HPIncludes: Tear down and assembly ARP head and main studs Boring motor with JGY torque plate headwork including assembly of all parts Bronze exhaust valve guides All new valve guide seals Brian Crower cams (other cams available at extra cost like Tomei and JWT) CP Pistons 86.5mm and bigger, any compression Eagle or BC rods New Nissan bearings, rods and mains Cometic head Gasket Greddy Rocker Arm Stoppers JGY Shim Service Stage 2: $4500 550HP Includes: Everything from Stage 1 BC springs or Greddy valve springs Crower Titanium retainers Over size valves, .5mm larger or 1mm larger Stage 3: $5100 600HP Everything from Stage 2 JGY Special SR sleeves (which allows you to go up to 92mm pistons = 2.2L SR) Stage 4: $5300 650HP Everything from Stage 3 Brian Crower Pro Rods Stage 5: $6900 ****HP Everything from Stage 4 Brian Crower Stroker Crank (several in-stock at JGY) choice of 91mm or 92mm (allows SR to go up to 2.4L) Also available: 94.4mm Stroker Crank, call for price |
|
RB Series Pricing: (HP slightly varies on RB20 motor)Stage 1: $5400 600HPIncludes: Tear down and assembly ARP head studs Boring motor headwork including assembly of all parts Bronze exhaust valve guides All new valve guide seals CP Pistons size depends on series of RB Eagle or BC rods New Nissan bearings, rods and mains Cometic head Gasket JGY Shim Service, depends on series of RB Stage 2: $6000 650HP Includes: Everything from Stage 1 Greddy or Tomei cams Stage 3: $6300 700HP Includes: Everything from Stage 2 Brian Crower Pro Rods Stage 4: $7000 800HP Includes: Everything from Stage 3 Nismo N1 Crankshaft to go to 2.6L on all series of RB’s Stage 5: $9600 ****HP (only for RB25 RB26 motors) Includes: Everything from Stage 4 Delete N1 Crankshaft (-$700) Brian Crower 2.8L crankshaft |
